Home > Safe Light System Installation Instruction
Lite Tech LED safe light system

What's included:
2-4 feet LED light strips with Velcro backing
1-Battery holder, use 8 AA batteries (batteries not included)
1- On/Off switch cable
Auto door open switch cable with roller switch

Optional Item:
20" LED cross wire for lighting

Instructions:
1. Stick LED strips along the frame of your safe door. Connect the two strips in a series. If the interior of your safe is not carpeted, please use the provided Heavy Duty Velcro double sided backing, be sure to use rubbing alcohol to clean the surface before sticking on the backing for best hold.

2. Connect the On/Off switch cable to the end of the LED strip

3. Install 8 AA batteries to battery pack, then connect battery pack to the On/Off switch cable.

4. If you want to use AC adapter instead, you can connect any standard 12V AC adapter to the On/Off switch cable. Just be sure to use 12V AC adapter with a 400 or more mAh rating.

Warranty:
We stand behind our products with a 1 years warranty. If our products have any malfunction due to defect within the warranty period, feel free to contact us at litetechauto@yahoo.com. We will replace the defective product free of charge.